Preparation before use
1.Soak before first use
It is recommended to completely soak the new cup in clean water for 30 minutes to remove impurities and balance the material's water absorption. If deep cleaning is required, gently rinse with a weak alkaline detergent and avoid using hard tools such as steel wire balls.
2.Heating pretreatment requirements
It is recommended to heat the formed Sprayed Two Color Ceramic Mug With Logo for the first time (such as soaking in warm water or low-temperature drying) to enhance material stability and prevent adhesion or leakage during subsequent use.
Taboos during use
1.Temperature control specifications
Avoid containing liquids that exceed 80 ℃, and do not pour boiling water directly, as it may cause cracking due to thermal expansion and contraction. After taking it out of the refrigerator, it needs to be allowed to stand at room temperature before serving hot drinks.
2.Material restrictions for packaging
• Prohibit the storage of oily substances (such as cooking oil and dairy products containing fat) to prevent them from penetrating the glaze and causing discoloration
• Avoid contact with acidic liquids (vinegar, lemon juice, concentrated fruit juice, etc.) to prevent the precipitation of glaze components
• Alcoholic beverages are recommended to be consumed for a short period of time (not exceeding 2 hours)
Cleaning and maintenance
1.Scientific cleaning methods
Use a soft bristled brush combined with neutral cleaning agent to clean, with a focus on cleaning the Designed Ceramic Coffee Mug mouth contact area. Stubborn tea stains can be treated by soaking them in warm water with baking soda, and chemical agents such as cleaning powder and bleach are prohibited.
2.Drying and Storage
After cleaning, it is necessary to invert and drain, and thoroughly air dry to avoid the growth of mold in humid environments. When storing, use a separate cup holder to prevent glaze wear caused by stacking.
Special Scenario Attention
1.Heating equipment usage
Microwave oven: limited to models marked as available and requires wiping off external water stains
Oven/Direct Fire: All sublimated ceramic cups are prohibited from use
Disinfection cabinet: Select low temperature mode (≤ 70 ℃)
2.Unexpected handling plan
The occurrence of cracking is a normal material characteristic and does not affect the safety of use, but it is necessary to strengthen cleaning to prevent stains from infiltrating the grooves. If a collision causes star shaped cracks on the inner wall, it should be stopped immediately.
Lifecycle Management
It is recommended to check the integrity of the glaze every 12 months and avoid collision with metal utensils during daily use. The average service life of 11oz Sublimation Ceramic Mug certified by professional testing institutions is 3-5 years. It is recommended to replace them after this period
